BEGODE GOTWAY 100V charger testingUpdated 4 months ago

1. It's possible the charger is bad. Do you have access to another  100V charger you could try charging the wheel with to see that the  symptom remains? 

2. it's also possible the fuse on the  charger is blown / loose. On your charger, please unscrew the fuse cap, circled below. Then, examine the fuse - you should see a tiny wire that  goes from one end to the other. If not, let me know. Otherwise, make  sure the fuse is all screwed in and try the charger again. 

3.  If you have access to a multimeter you can check that the charger  output has the correct voltage. Hook your leads up to the two pins  nearest to the notch in the charger (shown below) and set your meter to  DC voltage. Let me know what you find. 

Fuse location - unscrew this to pull the fuse: 

Fuse - see the tiny wire that connects the metal caps: 

Hooking  my multi meter to the charger to check voltage. If you do this, make  sure the fuse is installed and you do not cross the leads of the meter: 

Please let me know what you find and we'll go from there.